No rating

--/--

Overall Rating

Indian Institute of Technology, Madras

IIT P.O., Chennai, Chennai - 600036

 

Affiliated to Autonomous Institute

Official website


Studied here? Write a review >


Overview

Indian Institute of Technology Madras, is one among the foremost institutes of national importance in higher technological education, basic and applied research. Indian Institute of Technology Madras is one among the foremost institutes of national importance in higher technological education, basic and applied research. In 1956, the German Government offered technical assistance for establishing an institute of higher education in engineering in India. The first Indo-German agreement in Bonn, West Germany for the establishment of the Indian Institute of Technology at Madras was signed in 1959. The Institute was formally inaugurated by Prof. Humayun Kabir, Union Minister for Scientific Research and Cultural Affairs. IIT Madras is a residential institute with nearly 460 faculty, 4500 students and 1250 administrative & supporting staff and is a self-contained campus located in a beautiful wooded land of about 250 hectares. The Institute has fifteen academic departments and a few advanced research centres in various disciplines of engineering and pure sciences, with nearly 100 laboratories organised in a unique pattern of functioning. A faculty of international repute, a brilliant student community, excellent technical & supporting staff and an effective administration have all contributed to the pre-eminent status of IIT Madras. The campus is located in the city of Chennai, previously known as Madras. Chennai is the state capital of Tamil Nadu, a southern state in India. The Indian Institute of Technology, Madras, is an autonomous statutory organisation functioning within the Institutes of Technology Act. The sixteen IITs are administered centrally by the IIT Council, an apex body established by the Government of India. The Minister of Human Resource and Development, Government of India, is the Chairman of the Council. Each institute has a Board of Governors responsible for its administration and control.

Founded in1959
Timing08:00 AM to 05:35 PM
Working DaysMon-Fri

 

Facilities


Courses

Degree
5 Years
27648

Course Eligibility

Candidate should have passed 10+2 or equivalent in any stream or equivalent with 60% (55% for SC/ ST/ PD) marks in aggregate from recognised Board. Admissions will be based on Entrance Test Score.

Degree
2 Years
15249

Course Eligibility

Candidate should have Bachelor's degree in Chemistry with minimum 55% marks (50% for reserved category) and 60% aggregate marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score.

Degree
2 Years
15249

Course Eligibility

Candidate should have Bachelor's degree in Mathematics with minimum 55% marks (50% for reserved category) and 60% aggregate marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score.

Degree
2 Years
15249

Course Eligibility

Candidate should have Bachelor's degree in Physics with minimum 55% marks (50% for reserved category) and 60% aggregate marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score.

Degree
4 Years
212276

Course Eligibility

Candidate should have passed 10+2 with Physics, Chemistry & Mathematics and secured at least 75% marks or to be in the top 20 percentile (65% marks for SC/ ST) from any respective Boards. Admissions will be based on JEE Entrance Examination.

Degree
5 Years
212276

Course Eligibility

Candidate should have passed 10+2 with Physics, Chemistry & Mathematics and secured at least 75% marks or to be in the top 20 percentile (65% marks for SC/ ST) from any respective Boards. Admissions will be based on JEE Entrance Examination.

Degree
4 Years
212276

Course Eligibility

Candidate should have passed 10+2 with Physics, Chemistry & Mathematics and secured at least 75% marks or to be in the top 20 percentile (65% marks for SC/ ST) from any respective Boards. Admissions will be based on JEE Entrance Examination.

Degree
5 Years
212276

Course Eligibility

Candidate should have passed 10+2 with Physics, Chemistry & Mathematics and secured at least 75% marks or to be in the top 20 percentile (65% marks for SC/ ST) from any respective Boards. Admissions will be based on JEE Entrance Examination.

Degree
4 Years
212276

Course Eligibility

Candidate should have passed 10+2 with Physics, Chemistry & Mathematics and secured at least 75% marks or to be in the top 20 percentile (65% marks for SC/ ST) from any respective Boards. Admissions will be based on JEE Entrance Examination.

Degree
5 Years
212276

Course Eligibility

Candidate should have passed 10+2 with Physics, Chemistry & Mathematics and secured at least 75% marks or to be in the top 20 percentile (65% marks for SC/ ST) from any respective Boards. Admissions will be based on JEE Entrance Examination.

Degree
4 Years
212276

Course Eligibility

Candidate should have passed 10+2 with Physics, Chemistry & Mathematics and secured at least 75% marks or to be in the top 20 percentile (65% marks for SC/ ST) from any respective Boards. Admissions will be based on JEE Entrance Examination.

Degree
5 Years
212276

Course Eligibility

Candidate should have passed 10+2 with Physics, Chemistry & Mathematics and secured at least 75% marks or to be in the top 20 percentile (65% marks for SC/ ST) from any respective Boards. Admissions will be based on JEE Entrance Examination.

Degree
4 Years
212276

Course Eligibility

Candidate should have passed 10+2 with Physics, Chemistry & Mathematics and secured at least 75% marks or to be in the top 20 percentile (65% marks for SC/ ST) from any respective Boards. Admissions will be based on JEE Entrance Examination.

Degree
2 Years
215449

Course Eligibility

Candidate should have Bachelor's Degree or equivalent in any discipline with 60% marks (55% marks for SC/ ST) from any recognised University. Admissions will be based on Entrance Test Score followed by GD & PI.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have passed Master's Degree in Engineering/ Pharmacy/ Science with 60% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's Degree in Engineering/ Technology/ Science in Electrical Engineering/ Computer Science/ Chemical Engineering/ Materials Engineering/ Biotechnology from any recognised University. Admissions will be based Entrance Test Score & Personal Interview.

Course Eligibility

Candidate should have Master's degree in Industrial Engineering/ Industrial Management/ M.B.A./ Architecture/ Civil Engineering/ Town & Country Planning with 60% marks or Master's Degree in Science with 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's degree in Electrical Engineering/ Electrical & Electronics Engineering/ Electronics Engineering/ Electronics & Communication Engineering/ Instrumentation Engineering or Master's degree in Physics followed by Master's degree in Engineering with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's degree in Mathematics/ Statistics/ Physics/ Computer Science or M.E./ M.Tech. Industrial Mathematics & Scientific Computing with 60% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's Degree in Physics/ Applied Physics/ Material Science/ Solid State Technology or equivalent with 60% marks from any recognised University. Admissions will be based on Entrance & Personal Interview.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelors Degree in Engineering or Pharmacy or M.B.B.S or B.D.S. Admission will be based on valid GATE score or qualified for JRF through CSIR or ICMR exams or all India PG admission test or equivalent in order to be called for the interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's Degree in Mechanical Engineering/ Aerospace Engineering/ Agricultural Engineering/ Architectural Engineering/ Automobile Engineering/ Chemical Engineering/ Computer Science/ Electrical Engineering/ Electronics/ Energy Engineering/ Industrial Engineering/ Instrumentation/ Metallurgical Engineering/ Mining Engineering/ Naval Architecture/ Marine Engineering/ Production/ Manufacturing Engineering with required working experience with 60% marks or Master's Degree in Science with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
4 Years
212276

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Degree
5 Years
212276

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category). Admission will be based on valid GATE score and/or Suitability Test/ Interview.

Degree
4 Years
212276

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Degree
5 Years
212276

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Course Eligibility

Candidate should have Bachelor's degree in Civil/ Aerospace/ Mechanical/ Naval Architecture Engineering with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelor’s degree in Chemical Engineering and other disciplines of engineering/technology Or M.Sc. with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering/ Architecture or First Class M.Sc degree in Physics/ Applied Science/Material Science with 2 years experience in Civil Engineering area with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have Bachelor's degree or equivalent in any branch of Engineering/ Technology or Master's Degree in Mathematics/ Statistics/ Physics/ Computer Science/ M.C.A. with Mathematics/ Physics/ Statistics basic degree with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelor's degree in Electrical Engineering/ Electrical & Electronics Engineering/ Electronics Engineering/ Electronics & Communication Engineering/ Instrumentation Engineering or Master's degree in Physics. Candidates not having Bachelor's degree in Electrical/Electronics Engineering should qualify in a written test to be eligible for interview with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's degree in Civil/ Mechanical/ Electrical/ Biomedical Engineering/ Computer Science with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's Degree in Chemical Engineering or any other discipline of Engineering/ Technology or equivalent with 60% marks or Master's degree in Science with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Course Eligibility

Candidate should have Master's degree in Engineering/ Technology with 60% marks or Master's Degree in Science with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's Degree in Management or equivalent with minimum of 60% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
5 Years
27648

Course Eligibility

Candidate should have 10+2 in any stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on HSEE.

Course Eligibility

Candidate should have Master's degree or equivalent in Humanities and Social Sciences and allied discipline with minimum of 55% aggregate marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
5 Years
99349

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have passed Master's degree or its equivalent in Aerospace/ Civil/ Applied Mechanics/ Mechanical/ Electrical/ allied branches with 60% marks or Master's Degree in Science with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score.

Course Eligibility

Candidate should have passed Master's degree or equivalent in Metallurgical Engineering or Engineering other appropriate branch of Engineering/Technology with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's Degree in Engineering/ Technology with 60% marks or Master's degree in Science with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Agricultural Engineering, Architectural Engineering, Automobile Engineering, Chemical Engineering, Computer Science, Electrical Engineering, Electronics, Energy Engineering, Industrial Engineering, Instrumentation, Metallurgical Engineering, Mining Engineering, Naval Architecture, Marine Engineering, Production/ Manufacturing Engineering with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's Degree Aerospace/ Automobile/ Biomedical/ Civil/ Computer Science/ Electrical/ Electronics/ Engineering Physics/ Industrial Mathematics/ Instrumentation/ Mechanical/ Metallurgical/ Naval Architecture/ Production/ Manufacturing Engineering or Master's Degree in Design with 60% marks or Candidates with Master's degree in Sciences with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
5 Years
212276

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Degree
5 Years
212276

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's degree in Engineering/ Technology with 60% marks or Master's degree in Science with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelor’s degree in Aerospace/ Automobile/ Biomedical/ Civil/ Computer Science/ Electrical/ Electronics/ Engineering Physics/ Instrumentation/ Mechanical/ Metallurgical/ Naval Architecture/ Production/ Manufacturing Engineering or Bachelor’s degree in Design (B.Des.) or Master’s degree in Physics with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have M.A./ M.B.A. with minimum 55% marks with CAT/ MAT/ XAT/ GATE/ UGC/ CSIR/ ATMA/ CSIR (NET, JRF, Lectureship)/ GMAT/ GRE or MFT or At least 3 years of managerial experience in lieu of the qualifying examination. Or B.E./B.Tech or equivalent with First class or 60% marks in aggregate or Four-year professional degree (like AMIE) or equivalent programmes in a relevant discipline.

Course Eligibility

Candidate should have Bachelor's degree or equivalent in Metallurgical Engineering or other appropriate branch of Engineering/ Technology or Mater's degree in Science or allied fields with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelor's degree or its equivalent in Civil/ Mechanical/ Aerospace/ Naval Architecture or Master's degree in Oceanography/ Applied Mathematics/ Physics with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelor's degree in Aerospace/ Civil/ Chemical/ Computer Science/ Electrical/ Mechanical/ Metallurgical/ Naval Architecture/ allied branches Or Master’s degree in Physics/ Mathematics/ Chemistry and aptitude for research with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Degree
5 Years
99349

Course Eligibility

Candidate should have 10+2 in Science stream or equivalent with 60% (55% for SC/ST/PD) marks in aggregate from recognized board. Selection is based on JEE (Main) and JEE (Advance).

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Degree
2 Years
19213

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's in Science in relevant field with minimum 60% marks (55% for reserved category) from any recognised University. Admissions will be based on Entrance Test Score & Interview.

Course Eligibility

Candidate should have Bachelor's degree in Aerospace/ Civil/ Chemical/ Computer Science/ Electrical/ Mechanical/ Metallurgical/ Naval Architecture/ allied branches Or Master’s degree in Physics/ Mathematics/ Chemistry and aptitude for research with alteast two years relevant experience in Aerospace Industry/Research Organisation. Admission will be based on Institution norms.

Course Eligibility

Candidate should have Bachelor's degree in Civil/Aerospace/ Mechanical/ Naval Architecture Engineering with required working experience. Admission will be based on university norms.

Course Eligibility

Candidate should have Bachelors Degree in Engineering or Pharmacy or M.B.B.S or B.D.S with required experience. Admission will be based on Institution norms.

Course Eligibility

Candidate should have Bachelor’s degree in Chemical Engineering and other disciplines of engineering/technology Or M.Sc. with required working experience. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering/ Architecture or First Class M.Sc degree in Physics/ Applied Science/Material Science with 2 years experience in Civil Engineering area. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Bachelor's degree or equivalent in any branch of Engineering/ Technology or Master's Degree in Mathematics/ Statistics/ Physics/ Computer Science/ M.C.A. with Mathematics/ Physics/ Statistics basic degree with required working experience. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Bachelor's degree in Electrical Engineering/ Electrical & Electronics Engineering/ Electronics Engineering/ Electronics & Communication Engineering/ Instrumentation Engineering or Master's degree in Physics with required working experience.

Course Eligibility

Candidate should have Bachelor’s degree in Aerospace/ Automobile/ Biomedical/ Civil/ Computer Science/ Electrical/ Electronics/ Engineering Physics/ Instrumentation/ Mechanical/ Metallurgical/ Naval Architecture/ Production/ Manufacturing Engineering or Bachelor’s degree in Design (B.Des.) or Master’s degree in Physics with required working experience. Admission will be based on Institution norms.

Course Eligibility

Candidate should have M.A./ M.B.A. with minimum 55% marks with CAT/ MAT/ XAT/ GATE/ UGC/ CSIR/ ATMA/ CSIR (NET, JRF, Lectureship)/ GMAT/ GRE or MFT or At least 3 years of managerial experience in lieu of the qualifying examination. Or B.E./B.Tech or equivalent with First class or 60% marks in aggregate or Four-year professional degree (like AMIE) or equivalent programmes in a relevant discipline. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Agricultural Engineering, Architectural Engineering, Automobile Engineering, Chemical Engineering, Computer Science, Electrical Engineering, Electronics, Energy Engineering, Industrial Engineering, Instrumentation, Metallurgical Engineering, Mining Engineering, Naval Architecture, Marine Engineering, Production/ Manufacturing Engineering with required working experience. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Bachelor's degree or equivalent in Metallurgical Engineering or other appropriate branch of Engineering/ Technology or Mater's degree in Science or allied fields with required working experience. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Bachelor's degree or its equivalent in Civil/ Mechanical/ Aerospace/ Naval Architecture or Master's degree in Oceanography/ Applied Mathematics/ Physics with required working experience. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Master's Degree or equivalent in Aerospace/ Civil/ Applied Mechanics/ Mechanical/ Electrical/ allied branches with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree in Civil/ Mechanical/ Electrical/ Biomedical Engineering/ Computer Science with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidates should have Masters Degree in Engineering/ Pharmacy/ Science with 60% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree in Chemical Engineering or any other discipline of Engineering/ Technology or equivalent with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Degree
2 Years

Course Eligibility

Candidate should have Master's degree in Science with 60% marks or Master's degree in Engineering/ Technology in Electrical Engineering/ Computer sciences/ Chemical Engineering/ Materials Engineering/ Biotechnology from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have M.E./ M.Tech./ M.Sc. Degree from any recognised University and should have at least 5 years of managerial experience. Admissions will be based on University norms.

Course Eligibility

Candidate should have Master's degree in Engineering/ Technology with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree in Electrical Engineering/ Electrical & Electronics Engineering/ Electronics Engineering/ Electronics & Communication Engineering/ Instrumentation Engineering or Master's degree in Physics followed by Master's degree in Engineering with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree Aerospace/ Automobile/ Biomedical/ Civil/ Computer Science/ Electrical/ Electronics/ Engineering Physics/ Industrial Mathematics/ Instrumentation/ Mechanical/ Metallurgical/ Naval Architecture/ Production/ Manufacturing Engineering or Master's degree in Design with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree or equivalent in Humanities and Social Sciences and allied discipline with minimum of 55% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Degree
2 Years

Course Eligibility

Candidate should have Master's degree in Mathematics/ Statistics/ Physics/ Computer Science or M.E./ M.Tech. Industrial Mathematics & Scientific Computing with 60% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Masters degree/ PG Diploma/ Associate ship/Integrated Masters degree from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidates with a Master's degree in Mechanical Engineering/ Aerospace Engineering/ Agricultural Engineering/ Architectural Engineering/ Automobile Engineering/ Chemical Engineering/ Computer Science/ Electrical Engineering/ Electronics/ Energy Engineering/ Industrial Engineering/ Instrumentation, Metallurgical Engineering/ Mining Engineering/ Naval Architecture/ Marine Engineering/ Production/ Manufacturing Engineering with 60% marks or Master's Degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree or equivalent in Metallurgical Engineering or Engineering other appropriate branch of Engineering/ Technology with 60% marks Master's Degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree in Engineering/ Technology with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Degree
2 Years

Course Eligibility

Candidate should have Master's degree in Physics/ Applied Physics/ Material Science/ Solid State Technology or equivalent with 60% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelor's degree in Civil/ Mechanical/ Aerospace/ Chemical Engineering with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have Bachelor's degree in Civil/ Mechanical/ Aerospace/ Chemical Engineering with required working experience. Admission will be based on university norms.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's degree in Science with Mathematics as optional subject and aptitude for research. MBBS candidates with Mathematics in 10+2 with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have Bachelor's degree in Engineering or Master's degree in Science with Mathematics as optional subject and aptitude for research. MBBS candidates with Mathematics in +2 and having 2 years research/teaching experience may also apply. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering or M.Sc. degree in Mathematics/ Physics/ Chemistry/ Applied Geology with 2 years experience in Civil Engineering area. Or Bachelor's degree in Mining Engineering with one year relevant experience with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering or M.Sc. degree in Mathematics/ Physics/ Chemistry/ Applied Geology with 2 years experience in Civil Engineering area. Or Bachelor's degree in Mining Engineering with one year relevant experience. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering/ Environmental Engineering/ Chemical Engineering/ Biotechnology/ Agricultural Engineering or Master's degree in Environmental Science/ Microbiology/ Biochemistry/ Applied Mathematics/ Applied Geology/ Geophysics with 2 years experience in Civil Engineering with with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering/ Environmental Engineering/ Chemical Engineering/ Biotechnology/ Agricultural Engineering or Master's degree in Environmental Science/ Microbiology/ Biochemistry/ Applied Mathematics/ Applied Geology/ Geophysics with 2 years experience in Civil Engineering. Admission will be based on the Institution norms.

Degree
1 Year, 6 Months
15014

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering/ Aerospace Engineering/ Naval Architecture/ Mechanical/ Architectural Engineering or First Class M.Sc. degree in Applied Mathematics/ Chemistry/Materials Science/ Physics with 2 years experience in Civil Engineering area with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering/ Aerospace Engineering/ Naval Architecture/ Mechanical/ Architectural Engineering or First Class M.Sc. degree in Applied Mathematics/ Chemistry/Materials Science/ Physics with 2 years experience in Civil Engineering area. Admission will be based on the Institution norms.

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering/ Architecture or First Class B.E/B.Tech (Mechanical) working in Transportation Field with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have Bachelor's degree in Civil Engineering/ Architecture or First Class B.E/B.Tech (Mechanical) working in Transportation Field with required working experience. Admission will be based on the Institution norms.

Degree
1 Year, 6 Months
15014

Course Eligibility

Bachelor’s degree in Civil/ Mechanical/ Chemical/ Naval Architecture/ Ocean/ Aerospace/ Metallurgical/ Materials/ Electrical & Electronics/ Marine/ Mining/ Aerospace or its equivalent. Master’s degree in Oceanography /Earth Sciences /Applied Physics/ Applied Mathematics/ Geology/ Geophysics/ Remote Sensing or its equivalent with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Bachelor’s degree in Civil/ Mechanical/ Chemical/ Naval Architecture/ Ocean/ Aerospace/ Metallurgical/ Materials/ Electrical & Electronics/ Marine/ Mining/ Aerospace or its equivalent. Master’s degree in Oceanography /Earth Sciences /Applied Physics/ Applied Mathematics/ Geology/ Geophysics/ Remote Sensing or its equivalent with valid GATE score or CSIR/UGC NET/NBHM. B.Tech. from IIT with 8.0 and above CGPA (7.5 for SC/ST) on a 10 point scale are eligible to apply direct for MS programme.

Course Eligibility

Candidate should have Master's degree in Civil/ Aerospace/ Mechanical/ Naval Architecture Engineering with 60% marks or Master's degree in Science with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Course Eligibility

Candidate should have Master's degree in Civil/ Aerospace/ Mechanical/ Naval Architecture Engineering with an aptitude for research in Solid Mechanics with 60% marks Master's degree in Science with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's degree in Engineering Mechanics/ Civil Engineering/ Mechanical Engineering/ Aerospace Engineering/ Chemical Engineering with 60% marks or Master's degree in Science with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Course Eligibility

Candidate should have Master's degree in Engineering Mechanics/ Civil Engineering/ Mechanical Engineering/ Aerospace Engineering/ Chemical Engineering with 60% marks or Master's degree in Science with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree in Industrial Engineering/ Industrial Management/ M.B.A. after Civil Engineering or Bachelor's and Master's degree in Architecture/ Town & Country Planning with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree in Civil Engineering/ Engineering Mechanics or Master's degree in Mining Engineering with 2 years relevant experience with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on Entrance Test Score & Personal Interview.

Course Eligibility

Candidate should have Master's degree in Civil Engineering Engineering Mechanics or Master's degree in Mining Engineering with 2 years relevant experience with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have M.Tech./ M.S. or equivalent degree in Engineering Mechanics/ Aerospace Engineering/ Agricultural Engineering/ Environmental Engineering/ Chemical Engineering/ Biotechnology/ Applied Geology with 60% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Course Eligibility

Candidate should have M.Tech or M.S. or equivalent degree in Engineering Mechanics/ Aerospace Engineering/ Agricultural Engineering/ Environmental Engineering/ Chemical Engineering/ Biotechnology/ Applied Geology with 60% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Degree
2 Years
15514

Course Eligibility

Candidate should have Master's degree in Engineering Mechanics/ Aerospace Engineering/ Naval Architecture/ Mechanical/ Architectural/ Ocean Engineering or Master's degree in Computer Science & Engineering with basic degree in Civil Engineering with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University. Admissions will be based on Entrance Test Score & Personal Interview.

Course Eligibility

Candidate should have Master's degree in Engineering Mechanics/ Aerospace Engineering/ Naval Architecture/ Mechanical/ Architectural/ Ocean Engineering Or Master's degree in Computer Science & Engineering with basic degree in Civil Engineering with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on the Institution norms.

Course Eligibility

Candidate should have Master's degree in Master's degree in Architecture or Master's degree in Town and Country Planning/ Regional Planning/ City Planning/ Urban Engineering or Postgraduate Diploma in Town and Country Planning with specialisation in Traffic and Transportation Planning/ M.B.A. after obtaining a basic degree in Civil Engineering with 60% marks or Master's degree in Science with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on Entrance Test Score & Personal Interview.

Course Eligibility

Candidate should have Master's degree in Architecture/ Town and Country Planning/ Regional Planning/ City Planning/ Urban Engineering or 2 years full time Postgraduate Diploma in Town & Country Planning with specialisation in Traffic & Transportation Planning/ M.B.A. after obtaining a basic degree in Civil Engineering with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University. Admissions will be based on Institution norms.

Course Eligibility

Candidate should have Master's degree in Engineering/ Technology with 60% marks or Master's degree in Sciences with minimum 65% marks from any recognised University and should have relevant work experience. Admissions will be based on Institution norms.

Oops! We could not find any courses with this filter.

Try exploring other options by clicking the "All" button in the left sidebar.

 

 

Reviews

Studied here? Write a review >

--/--

Overall Rating

This institution has not been reviewed by anyone yet. Studied here? Be the first to Review

 


Location

IIT P.O., Chennai, Chennai - 600036

 

Placement

Notable Alumni

  • Marti G. Subrahmanyam
  • Anant Agarwal
  • Bhaskar Ramamurthi
  • Hari Balakrishnan
  • Lakshminarayanan Mahadevan
  • Shashi Nambisan
  • M. Satyanarayanan
  • Sridhar Tayur
  • T. K. Alex
  • Krishna Bharat
  • Gururaj Deshpande
  • Kris Gopalakrishnan
  • Prabhakar Raghavan
  • Venkat Rangan
  • Prem Watsa
  • B. N. Suresh
  • S. Sowmya
  • Raju Narayana Swamy
  • B. Muthuraman
  • Arvind Raghunathan

 

Recruiting Companies

Thermax
TVS Motor Company
Technip
Syntel
MRF
Mahindra & Mahindra
Larsen and Toubro
Jindal Steel & Power
JP Morgan
ITC
Infosys
Indian Navy
ICICI Bank
IBM
Hindustan Unilever Limited
Hero Motocorp
HCL Technologies
Microsoft
Facebook
Google
Flipkart
Deutsche Bank
Deloitte
Dell
Cognizant
CMC ltd.
Citibank
Cisco
Capegemini
Bosch
Axis Bank
Asian Paints
American Express
Adobe System
Abb Ltd.
NVidia
ONGC
Reliance
Philips
Samsung
Sony India
TATA Motors
TCS
Vodafone
Wipro
Xerox
Royal Bank of Scotland
Oracle

 

Are you looking for College?

Our team will assist you with best options available.

 


Similar Colleges


Indian Institute of Technology, Madras at IIT P.O., Chennai, Chennai - 600036